Printronix T6000 - Page 123

123
Application > PGL Setup > Forms Handling
This submenu allows the user to handle the form in various ways.
Disable
Standard behavior.
Auto Eject
Automatically ejects a page at the end of the job to spill
out the last page.
Auto TOF
Automatically does a form feed (FF) at the end of each
form to the next top of form.
Factory Default
Disable
Application > PGL Setup > PGL Normal
This option determines whether PGL passes the text data in Normal mode
according to LP+ or whether PGL will print the text data itself.
LP+ Menu
PGL will pass the text data to LP+ only in the default
setting state (6 LPI, default character set, and font
attribute).
PGL Menu
PGL will always print the text data itself.
Factory Default
LP+ Menu
Application > PGL Setup > UPC Descenders
This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
Always
UPC/EAN bar codes are printed with descenders,
even if there is no human readable data.
Never
UPC/EAN bar codes are printed without descenders if
the PDF command is present.
Only with PDF
UPC/EAN bar codes are printed with descenders only
when the PDF command is presented.
Factory Default
Always