Application > VGL Setup > Append Rotated
Determine if logos and alphanumeric strings are treated as separate
elements or appends logos to alphanumerics.
Logos and alphanumeric strings are treated as
separate elements.
Appends logos to an alphanumeric.
Application > VGL Setup > Truncate Alpha
Prevents the printing of Error 48 (Element Off Page Error) if alphanumeric
data, including spaces, extends beyond the right side of the form.
Prints Error 48 if the right side of the form is violated.
Inhibits Error 48 and prints the form regardless.
Application > VGL Setup > True Vert 1/10
Determines how line lengths are calculated – used for compatibility.
When disabled and in High Resolution, a vertical line’s
length in one inch and 1/10 inch increments is
interpreted as 70/72 inch and 7/72 inch respectively.
When enabled, a vertical line’s length is interpreted
exactly, which is 72/72 inch in one inch increments.
Application > VGL Setup > Absorb After ^PY
Determines how data after the ^PY command will be handled.
The paper motion line terminator immediately following
the graphics ^PY command will be ignored.
The system ignores all the data following ^PY until a
host generated terminator is detected and ignored.
System terminators following a graphics command are
sent to the printer and result in paper motion.
To Next Page
Loading...
