Psion Teklogix 7035 - Working with Sessions; Establishing a New Session; Listing Sessions and Moving to Other Sessions

Teklogix 7035, 8255 & 8260 Terminals User Manual 105
Chapter 6: ANSI Operations
Working With Sessions
6.4 Working With Sessions
Important: Use only lowercase letters when entering commands
at the “TCP >” prompt.
6.4.1 Establishing A New Session
• Press <CTRL>, and type a lowercase a.
At the TCP> prompt:
• Type tel in lowercase letters followed by the Host Name or IP address.
• Press <ENTER>.
• Log in as usual to begin working with the new session.
6.4.2 Listing Sessions And Moving To Other Sessions
To list the current sessions:
• Press <CTRL>, and type a lowercase a.
At the TCP> prompt:
• Type sess in lowercase letters, and press <ENTER>.
To move to another session:
• At the TCP> prompt, type sess in lowercase letters followed by the session
number to which you want to move.
e.g., Type sess 2 to move to session 2.
• Press <ENTER>.