Chapter 7: Setting Parameters
Host Conn
148
Teklogix 7035, 8255 & 8260 Terminals User Manual
Terminal #
For every application session you create, the terminal number assigned in the
“Terminal #” parameter must be non-zero and unique. This parameter defines the
terminal number for the ANSI session and uniquely identifies all transmissions to
and from the terminal.
Other applications running in the terminal, such as a TESS session or another ANSI
session must each have a different terminal number. In addition, each Teklogix
terminal using the radio link must have a unique terminal number.
7.7.1.1 Host Conn
Important: This option is not available when the terminal is operating with a
narrow band radio.
Conn Type
The options for this a parameter vary depending on the type of application you are
running – ANSI or TESS and the type of radio installed in your terminal.
For ANSI applications, this parameter allows you to choose one of the following
types of connections:
802.IQv2, 9010t (TCP Direct) or Telnet. Keep in
mind that choosing
Telnet allows the terminal to communicate directly with
the host.
Conn Type Telnet 802.IQv2, 9010t, Telnet
Settings » see text
Range
Host Conn
To Next Page
Loading...