Chapter 7: Setting Parameters
Codabar
142
Teklogix 7035, 8255 & 8260 Terminals User Manual
Inc Num Sys
If this parameter is enabled (set to “Y”), the number system digit is included with
the decoded bar code data.
Include Chk
When enabled, the check digit is included with the decoded bar code data.
Size/Chars
See “Size/Chars” beginning on page 139.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 133) must be set to “Y”.
Refer to “Addendum” on page 140.
7.6.3.7 Codabar
Size/Chars
See “Size/Chars” beginning on page 136.
7.6.3.8 Code 93
Size/Chars
See “Size/Chars” beginning on page 136.
Size/Chars »
Codabar
Size/Chars »
Code 93
To Next Page
Loading...