Psion Teklogix 7035 - Chapter 2: Assembly and Basic Operation

Chapter 2: Assembly And Basic Operation
14
Teklogix 7035, 8255 & 8260 Terminals User Manual
2.8 Terminal Indicators ..............................28
2.8.1 LEDs ..................................28
2.8.2 The Status Area – 7035 Only ......................28
2.8.3 Onscreen Indicators – 7035 Only....................29
2.8.4 Softkeys.................................31
2.8.5 The Battery Gauge – 7035 Only ....................31
2.8.6 The Beeper ...............................31
2.8.6.1 Beeper Volume – <BLUE> <F3> And <F4> .........32
2.8.6.2 Beeper Volume – The “Volume” Parameter..........33
2.9 The Display ..................................33
2.9.1 Adjusting The Display Contrast ....................33
2.9.1.1 Contrast Adjustment – <BLUE> <F1> And <F2> ......34
2.9.1.2 Contrast Adjustment Using The “Contrast” Parameter ....34
2.9.2 Panning The Display Contents .....................35
2.10 The Integrated Scanner Option – 7035 Only ................35
2.10.1 Warnings................................35
2.10.2 Operation Of The Integrated Scanner .................35
2.10.3 Scanning Techniques .........................37
2.11 Infrared (IrDA) Port – 7035 Only ......................37
2.12 Low Temperature, Freezer and Outdoor Terminals .............38
2.12.1 Hand-Held Terminals .........................38
2.12.2 Vehicle-Mount Terminals .......................38
2.12.3 Important Operating Instructions ...................39
2.12.3.1 For All Freezer Terminals ..................39
2.12.3.2 For Hand-Held Terminals Only ...............40
2.12.3.3 For Vehicle-Mount Terminals Only .............41
2.13 Maintenance .................................42
2.13.1 Cleaning All Terminals ........................42
2.13.2 7035 – Special Instructions ......................42
2.13.3 Maintaining The 7035 Battery ....................42