Psion Teklogix 7035 - Turning Encryption on and off; Resetting Connections

Appendix E: AirFortress™ Secure Client
Turning Encryption On And Off
E-4
Teklogix 7035, 8255 & 8260 Terminals User Manual
A ‘New’ window is displayed once the correct access ID is entered.
• Type a new 16-digit hexadecimal access ID, and press <ENTER>. (Keep in
mind that this access ID must match the one assigned to the AirFortress
Gateway (AF1100).
• In the ‘Confirm’ field, type the new access ID again, and press <ENTER>.
A message will confirm that you have a successfully changed the access ID.
• Press ‘M’ to return to the startup menu.
E.3.3 Turning Encryption On And Off
Keep in mind that turning encryption off allows unencrypted data to be sent to and
received by your terminal, leaving your network open to potential damage.
Important: /Encryption should only be turned off when connecting to a
network that is not protected by an AirFortress™ Gateway
(AF1100).
To toggle encryption on or off:
• Choose the ‘Toggle Encryption’ option from the menu. An encryption
prompt is displayed.
• Press ‘Y’, and then press the <ENTER> key.
E.3.4 Resetting Connections
This option helps manage the connection between the terminals using AirFortress™
and the other network devices. To reset connections:
• Choose ‘Reset Connections’ from the startup menu.