EasyManua.ls Logo

Psion Teklogix 7035 - About the Terminals; Features

Psion Teklogix 7035
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Teklogix 7035, 8255 & 8260 Terminals User Manual 5
Chapter 1: Introduction
About The Terminals
1.3 About The Terminals
The 7035 hand-held terminal and the 8255 and 8260 vehicle-mount RF terminals all
run DOS and can operate in a Teklogix narrowband or Teklan 902 spread spectrum
RF system using the RF connectivity options listed in the “Features” section below.
1.3.1 Features
Some features of these terminals include:
7035s are equipped with 33 MHz 486DX CPU with internal cache.
8255 and 8260 vehicle-mount terminals are equipped with 66 MHz 486DX
CPU with internal cache.
8 MB RAM – can be expanded to 16 MB.
4 MB of Flash ROM – can be expanded to 8 MB.
RF connectivity options include:
- IEEE 802.11b 2.4 GHz compliant PC card radios (1, 2 and 11 Mbps)
(TRX7431), (TRX7441).
- TRX7370 Narrowband PC card-based radios (403-512 MHz, 4800-
19200 bps).
- TRX7410 TekLan 902 MHz direct sequence spread spectrum radios.
7035 terminals can support standard external or optional internal
antennas. (Note that the internal antenna is only available with certain
802.11 radios.)
8255 and 8260 vehicle-mount terminals are shipped with external antennas
that are compatible with the operating RF system.
Rugged, sealed enclosure, suitable for industrial environments.
Freezer version available for the 8255 and 8260 vehicle-mount terminals
and 7035 hand-held terminals.
Seamless operation on all Teklogix 32-bit narrowband RF backbones:
- ANSI, TESS (IBM 3270, IBM5250 and HP2392) emulation
application built in.
- uses high performance TRX7370 narrowband radio.
Embedded DOS.
7035 terminal has three types of keyboards: 36-key, 44-key and 56-key.

Table of Contents