EasyManua.ls Logo

Psion Teklogix 7035 - Key Lock Function; The 7035 Hand-Held Key Lock Function; 8255 & 8260 Key Lock Function

Psion Teklogix 7035
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3: Keyboards – Operating Instructions
Key Lock Function
52
Teklogix 7035, 8255 & 8260 Terminals User Manual
3.2.4 Key Lock Function
The <SHIFT>, <ALT>, <CTRL>, <ORANGE> and <BLUE> keys have a lock
function that allows the function of these keys to be locked “on” until you unlock or
turn them “off”.
3.2.4.1 The 7035 Hand-Held Key Lock Function
Refer to “One-Shot Mode” on page 121 to learn how to define the lock and unlock
behaviour of the 7035 modifier keys.
On 7035 hand-held terminals, an onscreen message is displayed in uppercase letters
in the status area at the bottom of the terminal screen to indicate that a key is locked
“on”. For example, when the <CTRL> key is locked “on”, the onscreen message –
CTRL – is displayed in uppercase letters in the status area. For more information
about status area indicators, refer to “Onscreen Indicators – 7035 Only” on page 29.
3.2.4.2 8255 & 8260 Key Lock Function
Keep in mind that vehicle-mount terminals are available in two keyboard types –
‘F1 to F6’ and ‘F1 to ‘F10’ (see “8255 And 8260 Vehicle-Mount Terminal
Keyboards” on page 47 for a brief description). Depending on which keyboard type
you are using, locking and unlocking the <CTRL>, <ALT> or <SHIFT> key differs
slightly. These differences are highlighted in this section.
Important: Make certain that the appropriate keyboard type – ‘F1 to F6’
or
‘F1 to ‘F10’ – is selected in the “Keyboard Type” parameter
(see “Keyboard Type – Vehicle-Mounts Only” on page 130).
On 8255 and 8260 vehicle-mount terminals, LEDs are used to indicate the status of
a key. When a key is locked “on”, the corresponding LED stays on until the key is
unlocked. If you’ve only pressed a key once, the corresponding LED blinks until the
key is no longer active.
Locking And Unlocking The <ORANGE> Key
To lock this key “on”:
• Press the <ORANGE> key once.
To unlock or turn “off” this key:
• Press the locked <ORANGE> key a second time.
Note: The default key lock function of the <ORANGE> key can be changed
using the “One-Shot Mode” parameter (see page 121).

Table of Contents