Teklogix 7035, 8255 & 8260 Terminals User Manual 219
Chapter 8: Terminal Accessories
Environmental
8.8.12.2 Environmental
Operating temperature -20˚ C to 45˚ C (-4˚ F to 113˚ F)
Storage temperature -40˚ C to 60˚ C (-40˚ F to 140˚ F)
Charge mode 10˚ C to 45˚ C (50˚ F to 113˚ F)
Discharge mode -20˚ C to 60˚ C (-4˚ F to 140˚ F)
Relative humidity 10 to 90% (non-condensing)
Shock 25 G with an 11 ms rise-time on all axes
Vibration Random, 3-axis, 1.5g RMS, 4-500 Hz, 60 minutes.
8.8.12.3 Electrical
Target pack type PN 20605-003
Charge sites 1 site for in-unit charging.
Charge mode Fast charge CCCV
Operation under charge Not permitted. Charging will stop when
terminal is turned ON.
Input power Model 7937B – 11 - 16 VDC 36 W max.
Model 7937C – 10 - 55 VDC 36 W max.
Input connector AMP type CPC #206153-1 on flying lead.
Electrical interface 4 spring-loaded heavy-duty ‘pogo type’ pins in
base of unit.
Pin-out +BAT, -BAT. TEMP, DATA
8.8.12.4 Powered Cradle Battery Pack – PN 20605-003 (Li-Ion)
This battery uses 2200 mAh Li-ion cells with a charge specification of 10˚ C to
45˚ C (50˚ F to 113 ˚ F) and a discharge specification of -20˚ C to 60˚ C (-4˚ F
to 140˚ F). This pack has an internal MOSFET cell disconnect. When the 7035
is installed in the cradle and is turned off, the battery will charge. When the 7035
is turned on, the terminal will draw power from the cradle; the battery pack will
not discharge.
8.8.12.5 Agency Approvals
USA FCC Part 15 (EMI)
Canada ICES-003/CSA C108.8-M1983 (EMI)
Europe European “CE” mark: 72/73/EEC Low
Voltage Directive
89/336/EEC EMC Directive
To Next Page