EasyManua.ls Logo

Psion Teklogix 7035 - The 7942 In-Unit Charger; Mounting Bracket

Psion Teklogix 7035
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Teklogix 7035, 8255 & 8260 Terminals User Manual 203
Chapter 8: Terminal Accessories
The 7942 In-Unit Charger
Battery Life - 9 hours at 23˚ C (73.4˚ F) with TRX7370 radio
- 15 hours at 23˚ C (73.4˚ F) with TRX7431 radio
with backlight on 5%, 5 scan transactions per
minute, TESS emulation, 20605-003 battery
pack. Based on typical 1 year cell degradation.
Other radios will differ.
Supported Chargers Model #7967 6-gang custom charger
Model #7942 In-unit charger
Model #7978 3-gang custom charger
Memory No memory effect.
Battery Gauge Indicates remaining capacity, 0 to 100%,
resolution 10%. Nominal capacity of battery
pack is displayed as a reference.
Graceful Power Fail Operator is notied when battery capacity is low.
8.3 The 7942 In-Unit Charger
Important: The 7035 cannot be switched on while it is inserted in the 7942 in-
unit charger. In fact, if the terminal is “on” when it is inserted in
the charger, it is automatically switched off.
The 7942 In-Unit Charger is a single site, fast charger. This unit can charge Lithium-
Ion or Nickel-Metal Hydride batteries.
Note: To ensure that air flow through the base of the charger is unimpeded,
the charger should be placed on a hard, flat surface, free of possible
obstructions.
8.3.1 Mounting Bracket
The optional mounting bracket allows the 7942 charger to be permanently secured
to a table or bench, permitting one-handed removal of the 7035 terminal from the
unit. Charging temperature is restricted to from 10° to 30° C (50° to 86° F).

Table of Contents