Chapter 3: Keyboards – Operating Instructions
Accessing The Macro Keys
64
Teklogix 7035, 8255 & 8260 Terminals User Manual
For example, to access function key <F11>:
• Press the <ORANGE> key followed by <F1>.
To access function key <F12>:
• Press the <ORANGE> key followed by <F2>, and so on.
Accessing “SHIFT” Function Keys <F21> To <F30>
Accessing <F21> to <F30> requires pressing the <SHIFT> key and then a function
key from <F1> to <F10>.
For example, to access function key <F21>:
• Press the <SHIFT> key followed by <F1>.
To access function key <F22>:
• Press <SHIFT> <F2>, and so on to <F10>.
3.5.3 Accessing The Macro Keys
36-key 7035 terminals are equipped with 6 macro keys. The first two – <M1> and
<M2> – are directly accessible from the keyboard. <M3> to <M6> require key
combinations.
Accessing Macro Keys <M1> And <M2>
Macro keys <M1> and <M2> can be accessed directly – that is, a key combination
is not required.
• To access <M1>, press the key labelled <M1> in the bottom row of
the terminal.
• To access <M2>, press the key labelled <M2>.
Accessing Macro Keys <M3> And <M4>
To access <M3>:
• Press the <ORANGE> key followed by macro key <M1>, located in the
bottom row of the keyboard.
To access <M4>:
• Press <ORANGE> <M2>.
To Next Page
Loading...