Chapter 7: Setting Parameters
8255 And 8260 Backlight Parameters
126
Teklogix 7035, 8255 & 8260 Terminals User Manual
7.5.7.2 8255 And 8260 Backlight Parameters
Screen
Important: 8255 terminals with vacuum fluorescent displays do not require a
“Screen” backlighting option. They offer only the “Keyboard”
backlighting option.
The value assigned for the “Screen” parameter determines how long the backlight
will stay on after a key is pressed, a scan is completed or data is received. This
parameter is measured in minutes.
The allowable values are:
Disabled, 10 secs, 15 secs, 20 secs, 30
secs, 45 secs, 1 min, 5 mins, 10 mins, 15 mins, 20 mins, 30
mins, 45 mins, 1 hour, 2 hours and Always On.
Choosing
Always On sets the backlight to stay on constantly, whether or not a key
is pressed or data is received.
Keyboard
This parameter determines how long the keyboard backlight stays on after a key is
pressed. The “Keyboard” parameter is measured in seconds and minutes.
The allowable values are:
Disabled, 5 secs, 10 secs, 20 secs, 30
secs, 1 min, 2 mins, 4 mins and Always On.
Choosing Disabled turns off the keyboard backlight while Always On sets the
backlight to stay on at all times.
Screen Always On see text
Keyboard 10 secs see text
Range
Backlight
To Next Page
Loading...