Psion Teklogix 7035 - Global Macros; Displaying the Global Macros Menu

Teklogix 7035, 8255 & 8260 Terminals User Manual 181
Chapter 7: Setting Parameters
Global Macros
7.11 Global Macros
A macro has 19 programmable characters (or “positions”). The macro keys can be
programmed to replace frequently used keystrokes, along with the function of
executable keys like <ENTER>, <DEL>, function keys and arrow keys. They may
also be used to provide characters not normally accessed from the keyboard.
The methods used to create macros are described in this section.
7.11.1 Displaying The Global Macros Menu
Macros are programmed from within the “Global Macros” menu. If the Tekterm
application is currently active:
• Press <ALT> and type x to exit the Tekterm application.
The “Display Menu” appears on the terminal screen.
To display the “Parameters” menu:
• Type the letter a.
• Type your password in the Password window, and press <ENTER>.
A Parameters
B Emulations
C DOS Prompt
01 Display Menu
System »
Scanner »
Applications »
View Manager »
GPS
Ports »
Global Macros »
Network »
SNMP »
Radio »
Sound »
ANSI FK Remap »
Parameters