Psion Teklogix 7035 - Accessing Macro Keys

To Next Page

To Previous Page

Chapter 3: Keyboards – Operating Instructions

Accessing Macro Keys

Teklogix 7035, 8255 & 8260 Terminals User Manual

Accessing “BLUE” Function Keys <F5> To <F30>

Function keys <F5> to <F30> appear on the terminal plastic in blue print above and

to the right of alpha keys <A> to <Z>. To access a function key, you need to press

the <BLUE> key before pressing an alpha key.

For example, to access function key <F5>:

• Press the <BLUE> key followed by alpha key, <A>.

To access function key <F6>:

• Press the <BLUE> key followed by <B>, and so on.

3.4.3 Accessing Macro Keys

56-key 7035 terminals offer 10 macro keys, <M1> to <M10>. These keys are

located in the bottom two rows of the keyboard. They appear in orange print above

and to the left of alpha keys <Q> through <Z>.

Accessing <M1> To <M10>

To access <M1>:

• Press the <ORANGE> key followed by <Q>.

To access <M2>:

• Press the <ORANGE> key followed by <R>, and so on to <M10> –

<ORANGE> <Z>.

Important: A step-by-step description of how to program macros keys is

detailed in “Global Macros” on page 181.