Teklogix 7035, 8255 & 8260 Terminals User Manual 211
Chapter 8: Terminal Accessories
Important Charger Safety Instructions
Charge Operation Charging occurs automatically at insertion
without user intervention. Indicators
display charge status.
Limitations Will not charge NiMH batteries. However,
if a NiMH battery is inserted in this charger,
neither the battery nor the charger will be
damaged.
8.6 Important Charger Safety Instructions
• SAVE THESE INSTRUCTIONS – This manual contains important safety
and operating instructions for battery charger Model 7967 and 7942.
• Before using the battery charger, read all instructions and cautionary
markings on (1) battery charger, (2) battery, and (3) product using battery.
• Use of an attachment not recommended or sold by the battery charger
manufacturer may result in fire, electric shock, or personal injury.
• To reduce risk of damage to the electric plug and cord when unplugging the
charger, pull the plug rather than the cord.
• Make sure the cord is positioned so that it is not stepped on, tripped over,
or otherwise subjected to damage or stress.
• Do not operate the charger with a damaged cord or plug.
Replace immediately.
• Do not operate the charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; it should be inspected by qualified
service personnel.
• Do not disassemble the charger; it should be repaired by qualified service
personnel. Incorrect reassembly may result in electric shock or fire.
• To reduce risk of electric shock, unplug the charger from the outlet before
attempting any maintenance or cleaning.
To Next Page