Chapter 1: Introduction
Features
6
Teklogix 7035, 8255 & 8260 Terminals User Manual
• Ergonomic design:
- 7035 offers one-handed “scan & confirm” design.
- all terminals provide high visibility display fonts and low impact keys.
- full alphanumeric keyboard.
- keyboard can be customized using soft-label function keys, macro
keys and keyboard remapping tools.
- vehicle-mount terminals can be ordered with a QWERTY, an ABC or
an AZERTY keyboard.
- autopanning in text mode.
- 7035 status screen area displays system information – battery gauge,
RF link status and shift indicators – as the application is running.
- vehicle-mounts are equipped with a special set of LEDs that act as
shift indicators, blinking when a key is active and staying on when a
key is locked “on”.
- softkey labels are displayed at the bottom of all terminal screens,
indicating the function of function keys <F1> to <F4> on the 7035 –
<F1> to <F6> on vehicle-mounts.
• Two internal PC Card Type II slots:
- one slot is reserved for the terminal radio.
- the extra slot can be used for any PC Card Type II Flash disk, adding
from 16 to 128 MB of additional mass storage that appears as an
additional drive. (Note: This slot is not available if the terminal is
operating with a TRX7370 narrowband or a TRX7410 TekLan 902
spread spectrum radio.)
• RS-232 peripheral port supports decoded and non-decoded scanners, serial
printers and COM devices.
• Macro keys to program special characters, keys and/or frequently-used
key strokes.
To Next Page
Loading...