Teklogix 7035, 8255 & 8260 Terminals User Manual 13
ASSEMBLY AND BASIC OPERATION 2
2
2.1 Preparing Terminals For Operation.......................15
2.1.1 Client-Side Emulation Software .....................15
2.2 Preparing The 7035 For Operation .......................15
2.2.1 Connecting The 7035 Whip Antenna ..................15
2.2.2 The Battery Pack – Removing And Installing ..............15
2.2.3 Attaching The 7035 Hand-Strap Or The Pistol Grip...........17
2.2.3.1 Attaching The Hand Strap ...................17
2.2.3.2 Attaching The Pistol Grip....................17
2.3 Installing 8255/8260 Vehicle-Mount Terminals ................18
2.3.1 Mounting The 8255 Vehicle-Mount Terminal ..............18
2.3.2 Using The Cradle And Cradle Mounting Plate .............19
2.3.3 Mounting The 8260 Terminal ......................21
2.3.4 Connecting The 8255/8260 Antenna...................22
2.3.5 Installing The Cables...........................22
2.3.6 Installing The Extension Power Cable..................23
2.4 Turning The Terminals On And Off ......................24
2.4.1 7035 Hand-Held Terminal ........................24
2.4.2 8255 And 8260 Vehicle-Mount Terminals ................25
2.5 Resetting Terminals...............................25
2.5.1 Resetting The 7035............................25
2.5.2 Resetting The 8255 And 8260 ......................25
2.6 Working With The Startup “Display Menu” ..................26
2.6.1 The Display Menu ............................26
2.6.1.1 Bypassing Tekterm At Terminal Bootup ............26
2.6.1.2 Launching And Exiting The Parameters Menu.........26
2.6.1.3 Launching And Exiting Tekterm ................27
2.6.1.4 Launching And Exiting DOS ..................27
2.7 The Keyboard..................................27
To Next Page
Loading...