Teklogix 7035, 8255 & 8260 Terminals User Manual 149
Chapter 7: Setting Parameters
Host Conn
Settings
Note: The “Settings” sub-menu is not available when 802.IQv2 is selected as
the “Conn Type”. In addition, this sub-menu varies depending on which
option you’ve selected –
Telnet or 9010t.
Host
This parameter is used to assign a host IP address using the format ###.###.###.###
or a host name if DNS is used.
Port
“Port” specifies the 9010t (TCP Direct) or Telnet port number. The default
9010t port number assigned is 9999, the maximum allowable value. The default
Telnet port number assigned is 23 with a maximum allowable value of 32767.
ENTER Pmpt
This string indicates that the terminal is waiting for the user to press <ENTER> at
the time of connection.
ESC Prompt
This string indicates that the user can press the <ESC> key to terminate a
connection attempt before the connection is established.
Host see text
Port 23 0-32767
ENTER Pmpt Press ENTER to connect see text
ESC Prompt Press ESC to cancel see text
Auto Login N» Y/N
FK Remap N Y/N
Range
Telnet Settings
Host see text
Port 9999 0-9999
Range
9010t Settings
To Next Page
Loading...