Chapter 7: Setting Parameters
Host Conn
150
Teklogix 7035, 8255 & 8260 Terminals User Manual
Auto Login
The “Auto Login” parameters are used to define whether or not the terminal will
attempt to log in automatically.
The Auto Login sequence is as follows:
1. Host sends “Login Prompt”.
2. Terminal responds with “Login”.
3. Host sends “Password Prompt”.
4. Terminal responds with “Password”.
5. Host may send password echo.
6. Terminal ignores password echo if “Password Echo” is set to “Y”,
otherwise skip to step 7.
7. Terminal looks for “Login Failed” in next transmission from host.
8. Login successful or Login failed and return to step 1.
Login Prompt
When the terminal receives the string assigned to this parameter, it will respond with
“Login”.
Login
The terminal responds with this string when it receives a “Login Prompt”.
Password Prompt
When the terminal receives this string, it responds with a “Password”.
Password
The terminal responds with this string when it receives a “Password Prompt”.
Login Prompt gin: see text
Login see text
Password Prompt word: see text
Password see text
Password Echo Y Y/N
Login Failed incorrect see text
Range
Auto Login
To Next Page
Loading...