Teklogix 7035, 8255 & 8260 Terminals User Manual 171
Chapter 7: Setting Parameters
Fields
Entry Mode
“Entry Mode” parameters allow you to select a data entry mode. The modes are:
insert, replace, field and fcursor. “TESS Edit Modes And Cursor Movement” on
page 95 describes these modes in detail.
Open Fky Only
When this parameter is enabled (set to “Y”), the screen is open for function keys
only, and the cursor is not positioned. When this parameter is disabled, the screen is
open for data entry, and the cursor is placed in the first field (if it exists).
Video
Normal
The value assigned to this parameter specifies the actual video attributes to be
assigned to fields created with the “Normal” ANSI attribute – that is,
Normal,
Bold
, Faint, Blink, Reverse or Underline.
Bold
The value assigned to this parameter specifies the actual video attributes to be
assigned to fields created with the “Bold” ANSI attribute – that is,
Normal, Bold,
Faint, Blink, Reverse or Underline.
Faint
This option allows you to adjust the intensity on the screen and is set to Bold by
default. The value assigned to this parameter specifies the actual video attributes to
be assigned to fields created with the
Faint ANSI attribute – that is, Normal,
Bold, Faint, Blink, Reverse or Underline.
Normal BOLD see text
Bold NONE see text
Faint BOLD see text
Blink BLNK see text
Reverse REV see text
Underline ULIN see text
Range
Video
To Next Page