Chapter 7: Setting Parameters
Network
186
Teklogix 7035, 8255 & 8260 Terminals User Manual
Mobile IP
Home Agent IP
The valued entered for this parameter is the IP address of the Home Agent.
Home Agent Disc
Setting this parameter to “Y” allows the terminal to send a registration packet to the
Foreign Agent which, in turn, forwards the packet to the home network and the
Home Agent(s). The terminal uses the Home Agent(s) response (which includes the
Home Agent(s) IP address) to choose the Home Agent with which it will register.
Renew Threshld
The value assigned to this parameter indicates the number of seconds prior to
“Regstr Lifetime” expiration that the terminal attempts a registration renewal. If, for
example, this parameter is set to 20, the terminal will attempt to renew registration
20 seconds before “Regstr Lifetime” expires. When setting this parameter, keep in
mind that if the value is too low, the session will expire, and the terminal will be
unable to communicate with the host. On the other hand, if the value is too high, the
terminal will attempt to register continually.
Home Agent IP see text
Home Agent Disc N Y/N
Renew Threshld 20 20-300
Rgstr Lifetime 1800 300-65535
Rgstr Tmo Delay 3000 1000-10000
Reg Retry Count 3 1-10
Reg RX Delay Mn 3000 1000-10000
Reg on Contact N Y/N
Grat Arp Max Ct 3 1-5
Grat Arp RX Dly 2000 200-5000
Simultan. Binds N Y/N
Max Num Binds 1 1-8
Foreign Agents 10 2-32
Home Agent SPI 333 see text
Home Agent Key see text
Replay Protectn N Y/N
Mobile IP
Range
To Next Page