Teklogix 7035, 8255 & 8260 Terminals User Manual 237
Chapter 9: Specifications
Internal Scanner Specifications (7035 Only)
Table 9.2 SE1200ALR And SE2223 2-D Scanner Specifications
Minimum Print
Contrast
Minimum 40% absolute
dark/light reflectance measured
at 650 nm
- 35% absolute dark/light
reflectance differential (PDF)
- 25% absolute dark/light
reflectance differential (1-D)
Symbologies None
PDF417, Micro PDF,
UPC/EAN, Code 39,
Interleaved 2 of 5, Code 128,
Codabar, MSI Plessey, RSS
and Composite codes
Programmable
Parameters
None
Laser On Time, Aim Duration,
Power Mode, Trigger Mode,
Bi-directional Redundancy,
Symbology types/lengths,
Data formatting, Serial Param-
eters, Beeper Tone, Scan
Angle, Pattern controls
Interfaces
8-pin ZIF connector
Industry standard output
12 position ZIF connector.
Symbol Standard SSI interface
with logic level serial data
communication plus trigger,
beeper and decode LED
signals
Ambient Light:
Artificial:
Sunlight:
450 ft. candles (4,844 lux)
4,000 ft. candles (43,056 lux)
450 ft.-candles/4,844 lux
8,000 ft.-candles/86,112 lux
with correct enclosure.
Operating Temperature: -22º to 131ºF (-30º to 55ºC)
22º to 140° F/-30º to 60º C @
100% duty cycle
Storage Temperature: -40° to 140°F (-40° to 60°C) -40º to 158º F/-40º to 70º C
Humidity: 5% to 95% noncondensing 5% to 95% noncondensing
Power:
Input Voltage:
Input Current:
Standby Current:
5.0 VDC ± 10%
72 mA typical
50 µA max
±5VDC ± 10%
230mA
6.5mA
Shock 2,000 G 2,000 G
Parameter
7035 Advanced Long Range
(SE 1200ALR)
7035 2-D
(SE 2223 2-D)
To Next Page
Loading...