5–Managing Switches
Configuring a Switch
5-24 59266-01 B
Figure 5-12. Advanced Switch Properties Dialog Box
5. Make changes to the R_A_TOV and E_D_TOV switch timeout values:
R_A_TOV (Resource Allocation Timeout)—maximum time a frame
could be delayed and still be delivered. The default is 10000
milliseconds.
E_D_TOV (Error Detect Timeout)—maximum round trip time that an
operation between two N_Ports could require. The default is 2000
milliseconds.
6. Click OK to put the new values into effect.
7. On the Switch menu, click Switch Properties to view the Switch Properties
dialog box.
8. Select Online in the Administrative State drop-down list, and click OK to
place the switch back online.
9. Repeat this procedure on every switch in the fabric to ensure that all timeout
values are the same.
Managing System Services
The System Services dialog box (Figure 5-13) provides a central location for you
to enable or disable any of the external user services such as Simple Network
Management Protocol (SNMP), embedded web applet, command line interface,
Network Time Protocol (NTP), Common Information Model (CIM), and Call Home.
To display the System Services dialog box, on the Switch menu, click Services.
To Next Page
Loading...
