Qlogic 5800V Series User Manual

3–Managing Fabric Security
Device Security
3-10 59266-01 B
5. Click Apply to display the Save Security dialog box.
6. Click Save Security to apply changes to switch.
7. In the Security Set Activation dialog box, click Yes to save and activate the
security set, or click No to save the security set without activation.
8. Click Close to close the Save Security dialog box.
Adding an Existing Group to a Security Set
To add an existing group to a security set:
1. Select the entry switch from the fabric tree.
2. Click Security on the tool bar, or on the Security menu, click Edit Security
to view the Edit Security dialog box (Figure 3-2).
3. Select a group in a security set, and click and drag the group into the target
security set. This creates a copy of the group in the target security set. For
information about creating a new group in a security set, see “Creating a
Security Group” on page 3-11.
4. Click Apply to display the Save Security dialog box.
5. Click Save Security to apply changes to switch.
6. In the Security Set Activation dialog box, click Yes to save and activate the
security set, or click No to save the security set without activation.
7. Click Close to close the Save Security dialog box.
Removing a Group from a Security Set
To remove a group from a security set:
1. Select the entry switch from the fabric tree.
2. Click Security on the tool bar, or on the Security menu, click Edit Security
to view the Edit Security dialog box (Figure 3-2).
3. Select a group in a security set, and on the Edit menu, click Remove
Security Group from Set.
4. Click Yes to confirm the security group removal.
5. Click Apply to display the Save Security dialog box.
6. Click Save Security to apply changes to switch.
7. In the Security Set Activation dialog box, click Yes to save and activate the
security set, or click No to save the security set without activation.
8. Click Close to close the Save Security dialog box.
Removing a Group from all Security Sets
To remove a group from all security sets:

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English