Qlogic 5800V Series User Manual

1–Using Enterprise Fabric Suite
Starting Enterprise Fabric Suite
1-4 59266-01 B
 If you have not purchased license keys, enter the serial number on the
Enterprise Fabric Suite CD-ROM and click Save.
 If you have purchased a license key(s), enter the serial number on the
Enterprise Fabric Suite CD-ROM, enter the license keys, and click
Save.
Figure 1-1. Enter CD-ROM Serial Number and License Key Dialog Box
3. When Enterprise Fabric Suite first establishes a connection with a switch, for
security reasons, you will be prompted (Figure 1-2) to change your user
account password initially set up by the administrator. You will be prompted
to change the default password each time you attempt to view the fabric until
you change the password. Click OK, and change the user account
password. Refer to “Managing User Accounts” on page 5-1 for more
information.
Figure 1-2. Password Change Required Dialog Box
NOTE:
If this is not the first session, you can update the current serial number or
license key. On the Help menu, click License Info. On the information
dialog box, click Enter Key and type the new serial number.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English