Qlogic 5800V Series

5–Managing Switches
Configuring the Network
59266-01 B 5-39
Table 5-8. Create IP Security Association Dialog Box Fields
Field Description
Name Association name
Description Association description
Source
Address
IP address (version 4 or 6) or DNS host name of the host, switch, or
gateway from which data originates
Destination
Address
IP address (version 4 or 6) or DNS host name of the host, switch, or
gateway receiving data. If you specified an IP address for the Source
Address, the Destination Address must use the same IP version for-
mat.
Protocol Protocol IP security protocol to be used to process data. The protocol
can be one of the following:
 Encapsulated Security Payload (esp)
 Encapsulated Security Payload (esp-old)
 Authentication Header (ah)
 Authentication Header (ah-old)
SPI Security parameters index number
Authentication Algorithm with which to authenticate the source or destination:
 HMAC-MD5
 HMAC-SHA1
 HMAC-SHA256
 AES-XCBC-MAC
Authentication
Key
Key string to use for authentication
Encryption Algorithm with which to encrypt outbound data or decrypt inbound
data:
 DES-CBC
 3DES-CBC
 NULL
 BLOWFISH-CBC
 AES-CBC
 TWOFISH-CBC
Encryption Key Key string to use in encrypting or decrypting data