Qlogic 5800V Series User Manual

2–Managing Fabrics
Displaying Fabric Information
59266-01 B 2-7
9. Reconnect the inter-switch links, target devices, and initiator devices to the
replacement switch using the same ports as were used on the failed switch.
Displaying Fabric Information
The topology display is your primary tool for monitoring a fabric. The graphic
window of the topology display provides status information for switches,
inter-switch links, and the Ethernet connection to the management workstation.
For more information, see the Link data window (Figure 2-3).
The topology display data windows show device, active zone set, switch, and link
information.
 For information on devices in a fabric, see “Devices Data Window” on
page 2-26.
 For information on zone definitions for the active zone set, see “Viewing
Active and Configured Zone Set Information” on page 4-4.
 For information about the Name Server and Switch data windows, see
“Switch data window” on page 5-7.
 For information on switch links, see “Link Data Window” on page 2-7.
Link Data Window
The Link data window (Figure 2-3) displays information about all switch links in
the fabric or selected links in the topology display. This information includes the
switch name, the port number at the end of each link, and the link status icon. To
view the Link data window, select a fabric in the fabric tree, and then click the Link
tab.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English