1–Using Enterprise Fabric Suite
Setting Enterprise Fabric Suite Preferences
59266-01 B 1-9
3. Enter a password. When you attempt to open this fabric view file, you will be
prompted for this password. If you leave the File Password box blank, no
password will be required when attempting to open this fabric view file.
4. Click OK to save the view.
To open a fabric view file, do the following:
1. On the File menu, click Open View File to view the Open View dialog box.
2. Enter a name for the fabric view file or click Browse to select an existing file.
3. If the fabric view file was saved with a password, enter the password and
click OK.
4. Click OK to open the view file.
Setting Enterprise Fabric Suite Preferences
Using the Preferences dialog box (Figure 1-8) you can:
Change the location of the working directory in which to save files.
Change the location of the browser used to view the online help. The
Browser Location box is not supported/displayed for Macintosh OS X.
Enable (default) or disable the view file auto save and load feature. Refer to
“Exiting Enterprise Fabric Suite” on page 1-6 for more information on the
default fabric view file.
Enable (default) or disable the use of the Initial Start dialog box at the
beginning of a Enterprise Fabric Suite session. Refer to “Starting Enterprise
Fabric Suite” on page 1-3 for information about the Initial Start dialog box.
After a default fabric view file is created, this setting has no effect.
Enable (default) or disable the Non Secure Connections Check dialog box
that is displayed when you attempt to open a non secure fabric. If Display
Dialog When Making Non-secure Connections is enabled, you can open a
fabric with a non-secure fabric. Otherwise, you must have a secure
connection.
Enable (default) or disable the Event Browser. Refer to “Event Browser” on
page 2-21. If the Event Browser is enabled using the Preferences dialog box
(Figure 1-8), the next time Enterprise Fabric Suite is started, all events will
be displayed. If the Event Browser is disabled when Enterprise Fabric Suite
is started and later enabled, only those events from the time the Event
Browser was enabled and forward will be displayed.
To Next Page
Loading...
Need help?
General
