Qlogic 5800V Series

5–Managing Switches
Configuring SNMP
59266-01 B 5-61
5. Click OK to save the settings and close the SNMP v3 User Editor dialog box.
6. In the SNMP v3 Manager dialog box, click OK to save and activate the
SNMP v3 security configuration.
Modifying an SNMP v3 User
To modify an SNMP v3 user:
1. Select the entry switch in the fabric tree.
2. On the Switch menu, click SNMP and click SNMP v3 Manager to view the
SNMP v3 Manager dialog box (Figure 5-27).
3. Select a user in the user list, and on the Edit menu, click Edit User to view
the SNMP v3 User dialog box.
4. Modify the entries as needed, and click OK. For information about the entry
fields, see Table 5-14.
5. Click OK to save the settings and close the SNMP v3 User Editor dialog box.
6. In the SNMP v3 Manager dialog box, click OK to save and activate the
SNMP v3 security configuration.
Removing an SNMP v3 User
To remove an SNMP v3 user:
1. Select the entry switch in the fabric tree.
2. On the Switch menu, click SNMP and click SNMP v3 Manager to view the
SNMP v3 Manager dialog box (Figure 5-27).
3. Select a user in the user list, and on the Edit menu, click Remove User.
4. Click Yes to remove the user; click Cancel to cancel the removal.
5. Click OK to save the settings and close the SNMP v3 User Editor dialog box.
6. In the SNMP v3 Manager dialog box, click OK to save and activate the
SNMP v3 security configuration.