3–Managing Fabric Security
Device Security
3-8 59266-01 B
1. Select the entry switch in the fabric tree.
2. Click Security on the tool bar, or on the Security menu, click Edit Security
to view the Edit Security dialog box (Figure 3-2).
3. On the File menu, click Open to view the Open dialog box.
4. Browse for and select a previously saved security database file, and click
Open. The security database appears in the Edit Security dialog box. You
can now modify the security database as described in “Managing Security
Sets” on page 3-8 and “Managing Security Groups and Members” on
page 3-11.
Resetting the Security Database
Resetting the security database removes all security sets and groups. To reset the
security database:
1. Select the entry switch in the fabric tree.
2. Click Security on the tool bar, or on the Security menu, click Edit Security
to view the Edit Security dialog box (Figure 3-2).
3. On the Edit menu, click Clear Security.
4. In the Remove All dialog box, click Yes to remove all security sets and
groups; click no to cancel the operation.
5. Click Apply to display the Save Security dialog box.
6. Click Save Security to apply changes to switch.
7. In the Security Set Activation dialog box, click Yes to save and activate the
security set, or click No to save the security set without activation.
8. Click Close to close the Save Security dialog box.
Managing Security Sets
This following describes the security set management tasks.
Creating a Security Set
To create a security set:
1. Select the entry switch in the fabric tree.
2. Click Security on the tool bar, or on the Security menu, click Edit Security
to view the Edit Security dialog box (Figure 3-2).
3. Choose one of the following methods to view the Create a Security Set
dialog box:
Click Security Set on the tool bar.
Right-click in the graphic window, and select New Security Set on the
shortcut menu.
To Next Page
Loading...
Need help?
General
