Qlogic 5800V Series User Manual

5–Managing Switches
Configuring the Network
59266-01 B 5-49
1. On the Switch menu, click Network, and then click IPsecIKE Properties to
view the IKE Configuration dialog box (Figure 5-19).
2. On the IKE Policy Database side, click the policy in the list to be copied.
3. Click Copy.
4. Click OK to save the changes and exit the IKE Configuration dialog box, or
click Cancel to exit without saving any changes.
Pasting a Policy Configuration
To paste a copied policy configuration from the workstation clipboard:
1. On the Switch menu, click Network, and then click IPsecIKE Properties to
view the IKE Configuration dialog box (Figure 5-19).
2. On the IKE Policy Database side, click Paste.
3. The policy configuration copied to the workstation clipboard is added to the
IKE Policy Database list, and is renamed automatically.
4. Click OK to save the changes and exit the IKE Configuration dialog box, or
click Cancel to exit without saving any changes.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English