2–Managing Fabrics
Transparent Router
2-18 59266-01 B
Select the New Configuration option if the remote fabric does not
have an active zone set. Executing the commands on the remote
fabric automatically adds the commands (inter-fabric zones) to create
and activate the zone set. The Configuration Name entered is the
name of the active zone set that is created.
9. Click Export and select a path name (TXT file extension only) in the Save
dialog box.
Selecting the same path name will overwrite the first path name.
10. Click Save to save the zoning commands text file on your workstation.
NOTE:
If the commands are run and the Configuration Name is not the
name of the active zone set in the remote fabric, the commands
attempt to replace the active zone set with a new zone set with
the new name, containing only the Inter Fabric Zones. This will
not succeed unless you respond to CLI queries to accept
activation of this new zone set.
NOTE:
The commands generated for Cisco switches assume that zoning will
be applied to VSAN 1. If this is not the correct VSAN, you must edit the
commands accordingly before executing the commands.
To Next Page
Loading...
Need help?
General
