3. Installation and setup ABL800 FLEX Operator's Manual
Quality control setup, Continued
QC schedule
This program allows you to schedule quality control measurements for your
analyzer.
The screen shows the timetable for all days of the week and time during a day.
Step Action
1.
To select time during a day, use the ↑ and ↓ buttons.
2.
To display other weekdays, use the ← and → buttons.
Symbols for manual and automatic quality control are as follows:
measurement(s) on the control solution manually performed.
measurement(s) on the control solution automatically performed.
To add a new quality control solution to a schedule, do the following:
Step Action
1.
Select the desired time.
2.
Press the Add button to display the screen below.
Slots/quality
control
solutions
Touch the “QC slot” box to activate it.
Continued on next page
3-40
To Next Page
Loading...
Need help?
General
