2. What Is what ABL800 FLEX Operator's Manual
Analyzer status, Continued
Calibration
status
(continued)
Calibration Type Lists each calibration type along with its status:
?+
Pending or overdue calibration. The last
calibration was not accepted.
Last Time The date and time the last calibration of the specified type
was performed.
Next Time The date and time the next calibration of the specified
type is due according to the Calibration Schedule - see
Calibration Schedule, chapter 3.
Interval The time interval between calibrations as set up in the
Calibration Schedule.
The following buttons are available:
During a
calibration:
Result
Press to display the result of the highlighted calibration.
Electrode Upd.
Press to display the electrode updatings for the ongoing
calibration.
After a
calibration:
Result
Press to display the result of the highlighted calibration.
Start
Calibration
Is activated for the overdue calibrations or the calibrations
with "?".
Continued on next page
2-30
To Next Page
Loading...
Need help?
General
