Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
9.2.1.2 SPECIFICATIONS
As of the date this manual was published, the following specifications apply to all RFL 9508 Power
Amps, unless otherwise noted. Because all RFL products undergo constant refinement and
improvement, these specifications are subject to change without notice.
Number Of Inputs: Four.
Input Level:
+4dBm@75 Ohms - single input,
+1dBm@75 Ohms - two inputs.
Input Impedance: 75 Ohms nominal.
Idle Noise: -65 dBmO, measured in a 3-kHz bandwidth.
Frequency Response: Flat within +/-2.0dB from 20kHz to 500 kHz
Third Order Intermodulation Distortion:
From 60 to 350 kHz: -60 dBmO.
Below 500kHz: -50 dBmO.
Harmonic Distortion: -40 dB.
Maximum Output: 50 Watts PEP
Output Resistance: 50 Ohms nominal.
Input Power:
+90Vdc@ 2.0 Amps
+30 Vdc@ 0.2 Amps
RFL 9785 RFL Electronics Inc.
Operating Temperature: -20
o o o o
C to +65 C (-4 F to +149 F).
Dimensions:
5.2 inches (13.2 cm)high
17.1 inches (43.4 cm)wide
4.3 inches (10.9 cm)deep
Weight: 11 lbs 9 oz (5.3 kg)
May 16, 2011 9-6 (973) 334-3100
To Next Page
Loading...
