Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
9785>H [ENTER]
This tells the RFL 9785 to send a list of APRIL commands called the "main menu" to your terminal.
The main menu appears in Figure 14-3.
RFL Electronics APRIL(t) Remote Communications, Version 2.1 (c)1993,1999
H - Display the main menu
V - Go to the values display
P - Go to the programming menu (password required)
D - Go to the read settings menu
F - Go to the configuration and software version display
U - Enter the update mode
X - Exit the update mode
S - Go to sequence of events menu
W – Window remote April
9785>
Figure 14-3. APRIL main menu
For more information on each APRIL command, refer to the paragraph numbers listed below.
Command Meaning Paragraph
H Display the main menu 14.3
V Go to the values display 14.5
P Go to the programming menu (password) 14.6
D Go to the read settings menu 14.7
F Go to the configure and software version display 14.8
U Enter the update mode 14.9
X Exit the update mode 14.9
S Go to sequence-of-events menu 14.10
W Window remote April 14.11
14.4 DISPLAYING APRIL HELP
Any time you need to see a list of APRIL commands while the “9785>” prompt is displayed; use the
“H” command.
9785>H [ENTER]
When you invoke the “H” command, the APRIL command main menu shown in Figure 14-3 will re-
appear on your screen.
RFL 9785 RFL Electronics Inc.
April 25, 2005
14-3 (973) 334-3100
To Next Page
Loading...
