Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL 9785 RFL Electronics Inc.
March 1, 2013
xvi
(973) 334-3100
REVISION RECORD
Rev. Description Date Approval
8-7-99
New Document Release 8-3-99 CS
8-7-99
Revised in accordance with ECO numbers: 9785-004
and -005.
11-3-99 CS
11-5-99
Revised in accordance with latest engineering information
3-14-00 CS
2-29-00
Revised in accordance with ECO numbers: 9785-008, 010,
011, 012, 013, 019, 020 and 023. Revised in accordance with
ECO num
bers: 9780-005, 014, 016, 017, 021, and 034. Revised
in accordance with RFA num
ber: 7005.
6-26-00 CS
7-5-00
Revised in accordance with ECO numbers: 9785-026, 028.
Revised in accordance with ECO numbers: 9780-046, 047, 059.
7-28-00 CS
11-8-00
Revised in accordance with ECO number: 9785-033
Added new Section 16: Checkback Comms Module
Added new Section 20: Checkback Alarm Chassis
Added new SS I/O modules: 106635-1, -2, -3, and –4
12-8-00 CS
3-31-01
Revised in accordance with ECO number:
9785-040: Added External Power Amp I/O
9785-041: Revised AM Logic Module
Corrected RCVR Detector Module component designations
Updated SOE/IRIG-B schematic and parts list
Revised Solid State Input I/O Module (deleted 106435-1, -2
and added 106435-3, -4, -5)
3-31-01 CS
9-10-01
Revised in accordance with ECO number:
9785-030: Added potentiometer to voice module
9785-044: Rx Detector, changed C66A to C66B
9785-046: Rx Detector, changed R89 to 100Ω
9785-047: Added “modules fully seated” warning to page vi
9-17-01 CS
To Next Page
Loading...
