Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL 9785 RFL Electronics Inc.
April 25, 2005
14-13 (973) 334-3100
Command Meaning Paragraph
H Display sequence-of-events help 14.10.1
D Dump All Events To Port 14.10.3
E See Directory Of Events 14.10.4
F Force a Sequence of Events Record 14.10.5
R Reset All Events 14.10.6
Q Leave Sequence-of-Events menu 14.10.7
## View an event record 14.10.8
14.10.1 DISPLAYING SEQUENCE-OF-EVENTS HELP
Any time you need to see a list of all the sequence-of-events menu commands, use the “H” command.
9785-S>H [ENTER]
When you invoke the “H” command, the sequence-of-events menu shown in Figure 14-11 will re-
appear on your screen.
14.10.2 DUMPING THE SEQUENCE-OF-EVENTS LOG TO A PORT
To transfer the event records in the sequence-of-events log from the RFL 9785 to your terminal or PC,
use the “D” command:
9785-S>D [ENTER]
When you invoke the “D” command, each record will appear as ASCII text on your screen as it is
being transferred. The records are displayed in reverse chronological order, starting with the most
recent event. Each individual log record is displayed as described in paragraph 14.10.3.
Note that the SOE log record number refers to the data’s location in a circular memory buffer. The
most recent event may be any record number from 1 through 40.
When all the events have been dumped, the “9785-S>” prompt will re-appear on your screen.
14.10.3 VIEWING THE DIRECTORY OF EVENTS
To view a list of the events presently stored in the sequence-of-events log, use the “E” command:
9785-S>E [ENTER]
When you invoke the “E” command, a Directory Of Events display similar to the one shown in Figure
14-11 will appear.
To Next Page
Loading...
