USING SERVICE PROGRAM MODES
B039/B040/B043 5-16 SM
4
Mode Number/Name Function/[Setting]
White Line Erase 941*
Selects the white line erase level.
[ 0 ~ 5 / 2 / 1/step]
None Weak Strong
0 1 – 2 – 3 – 4 –5
• This setting is effective only Photo 1, Photo 3, Special 3
or Special 4 mode.
• 0: White line erase is not used, and white level
correction is used instead
• This setting is applied regardless of what mode has
been selected in SP4-921.
!
6.5.4 IPU
Black Line Erase 942*
Selects the black line erase level. This setting is effective
only when originals are scanned by the A(R)DF.
[ 0 = None / 1 = Weak / 2 = Normal / 3 = Strong ]
This setting is applied regardless of what mode has been
selected in SP4-921.
!
6.5.4 IPU
(Have Engine Firmware 1.14 or Newer)
Positive/Negative
1 Text
943*
2 Photo
[ 0 = No / 1 = Yes ]
DFU
⇒
Rev. 02/2003
To Next Page
Loading...
