Ricoh B039 - Page 480

Fax Unit B404
SERVICE RAM ADDRESSES
SM 5-63 B404
6800CA(H) - User parameter switch 10 (SWUSR_0A)
Bits 0 to 2: Not used
Bit 3: Page reduction 0: Off, 1: On
Bits 4 to 7: Not used
6800CB(H) - User parameter switch 11 (SWUSR_0B)
Bit 0: Not used
Bits 1 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station
0: Off, 1: On
Bit 7: Not used
6800CC(H) - User parameter switch 12 (SWUSR_0C)
Bits 0 to 7: Not used
6800CD(H) - User parameter switch 13 (SWUSR_0D)
(This switch is not printed on the user parameter list.)
Bits 0 and 1: PSTN access method from behind a PABX
Bit 1 0 Setting
00PSTN
0 1 Loop start
1 0 Ground start
1 1 Flash start
Bits 2 to 7: Not used
6800CE(H) - User parameter switch 14 (SWUSR_0E)
Bit 0: Message printout while the machine is in Night Timer mode 0: On, 1: Off
Bit 1: Maximum document length detection (Well log)
0: Double letter, 1: 1200 mm (Memory transmission)
Bit 2: Batch transmission 0: Off, 1: On
Bit 3: Setting before mode key (Copy/Fax/Printer) is pressed
0: Not cleared, 1: Cleared
Bits 4 to 6: Not used
Bit 7: Manual service call (sends the system parameter list to the service station)
0: Off, 1: On