SERVICE RAM ADDRESSES
B404 5-64 SM
6800CF(H) - User parameter switch 15 (SWUSR_0F)
Bits 0, 1 and 2: Cassette for fax printout
Bit 2 1 0 Setting
0 0 1 1st paper feed station
0 1 0 2nd paper feed station
0 1 1 3rd paper feed station
1 0 0 4th paper feed station
Other settings Not used
Bits 3 and 4: Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only 0: On, 1: Off
Bits 6 and 7: Not used
6800D0(H) – User parameter switch 16 (SWUSR_10)
(This switch is not printed on the user parameter list.)
Bits 0 and 1: Not used
Bit 2: Paper size selection priority for an A4 size fax message when A4/LT size
paper is not available.
0: A3 has priority, 1: B4 has priority
Bits 3 to 7: Not used
6800D1(H) – User parameter switch 17 (SWUSR_11)
Bits 0 and 1: Not used
Bit 2: Inclusion of the “OK” button when a sequence of Quick dials is selected for
broadcasting
0:Not needed, 1: Needed
Bits 3 to 6: Not used
Bit 7: Action when the user presses the “Start” key without an original when using
on hook dial or an external telephone.
0: Displays “Cannot detect original size”
1: Receives an incoming fax message
6800D2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date 0: Off, 1: On
Bit 1: TTI sender 0: Off, 1: On
Bit 2: TTI file number 0: Off, 1: On
Bit 3: TTI page number 0: Off, 1: On
Bit 4 to 7: Not used
To Next Page
Loading...
