Fax Connection Unit Type D (Remote Fax)
D649 16 SM
2) If you use "Remote Reception per Sender"
1. Press [Facsimile Features] to select.
2. Press [Program Special Sender] in [Reception Settings] to select.
3. Select the Special Sender.
4. Press [Remote Reception Setting per Sender] to select.
5. Press [On] and [Remote Machine] to select.
6. Enter an IP address or a host name of the client-side machine to connect.
7. Press [OK] to exit from the setting.
3) If you use "Remote Reception per Box"
1. Press [Facsimile Features] to select.
2. Press [Box Setting] in [General Settings] to select.
3. Select the box.
4. Press [Personal Box] to select.
5. Enter a dial-in number.
6. Press [Remote Machine] to select.
7. Enter an IP address or a host name of the client-side machine to connect.
8. Press [OK] to exit from the set-up procedure.
Remote Fax Icon Addition
This procedure allows the remote fax icon to appear on the home screen of the operation panel.
On both the Remote Machine and the Client-side Machines:
1. Press [User Tools].
2. Press [Edit Home].
3. Press [Add Icon].
4. Press [Remote Fax].
5. Press a [Blank] to set a location for the remote fax icon.
6. Press [Exit] to exit from the set-up procedure.
Rev. 11/08/2012
To Next Page
Loading...
