Ricoh D117 User Manual

PM Parts Settings
SM 3-3 D117/D118
Preventive
Maintenance
3.2.3 PREPARATION BEFORE OPERATION CHECK
1. Clean the exposure glasses (for DF and book scanning).
2. Enter the user tools mode.
3. Do the "Automatic Color Calibration(ACC)" for the copier mode & printer mode as follows:
 Print the ACC test pattern (User Tools > Maintenance > ACC > Start).
 Put the printout on the exposure glass.
 Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
 Close the ARDF or the platen cover.
 Press "Start Scanning" on the LCD. Then, the machine starts the ACC.
4. Exit the User Tools mode, and then enter the SP mode.
5. Do the "Forced line position adjustment" as follows.
 First do SP2-111-3 (Mode c).
 Then do SP2-111-1 (Mode a).
 To check if SP 2-111-1 was successful, watch the screen during the process. A message
is displayed at the end. Also, you can check the result with SP 2-194-10 to -12.
6. Exit the SP mode.
3.2.4 OPERATION CHECK
Check if the sample image has been copied normally.

Ricoh D117 Specifications

General

Functions	Print, Copy, Scan, Fax
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Product Type	All-in-One Printer
Print Technology	Laser
Scan Type	Flatbed, ADF
Paper Handling Input	250-sheet input tray
Paper Capacity	250 sheets
Connectivity	USB, Ethernet
Operating System Compatibility	Windows, Mac