Ricoh D117 - Cert Expire Timing; Proxy Host; Proxy Port Number; Use Proxy

Main SP Tables-5
D117/D118 3-338 SM Appendix
061
Cert Expire Timing *CTL [0 to 0xffffffff / 0 / 1/step] DFU
Proximity of the expiration of the certification.
062
Use Proxy *CTL
[0 or 1 / 0 / 1/step]
0: Not use
1: Use
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
063
Proxy Host *CTL [up to 127 / - / 1/step]
This SP sets the address of the proxy server used for communication
between the RCG device and the gateway. Use this SP to set up or display
the customer proxy server address.
The address is necessary to set up the embedded RCG-N.
 The address display is limited to 128 characters. Characters beyond
the 128 character are ignored.
 This address is customer information and is not printed in the SMC
report.
064
Proxy Port Number *CTL [0 to 0xffff / 0 / 1/step]
This SP sets the port number of the proxy server used for communication
between the embedded RCG-N and the gateway. This setting is necessary to
set up the embedded RC Gate-N.
 This port number is customer information and is not printed in the
SMC report.