Ricoh D117 - Thick1:Bias; Thin:envcorrectiontable; Thin:switchtimingtrailedge

Main SP Tables-2
SM Appendix 3-127 D117/D118
Appendix:
SP Mode
Tables
2478
[Thin:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode.
001 PaperTransfer:Standard:1side *ENG
[0 to 50 / 0 / 2mm/step]
003 Paper Transfer:Low:1side *ENG
005
Separation
DC:Standard:1side
*ENG
007 Separation DC:Low:1side *ENG
2479 [Thin:EnvCorrectionTable]
013
Separation
DC:Standard:1side
*ENG
[1 to 100 / 30 / 1/step]
015 Separation DC:Low:1side *ENG
2479 [Thin:EdgeEnvCorrection]
017
Separation
DC:Standard:1side
*ENG
[1 to 100 / 30 / 1/step]
019 Separation DC:Low:1side *ENG
2481
[Thick1:Bias]
Adjusts the DC voltage of the discharge plate for thick 1 paper.
003 Separation DC:1side *ENG
[0 to 4000 / 0 / 10-V/step]
004 Separation DC:2side *ENG