Ricoh D117 - Non Image Area:bias; Power On:bias; Transfer Roller Cl:bias

Main SP Tables-2
SM Appendix 3-99 D117/D118
Appendix:
SP Mode
Tables
2311
[Non Image Area:Bias]
Adjusts the bias of the paper transfer roller between images
001
Image Transfer *ENG [10 to 250 / 100 / 5%/step]
Adjusts the bias of the image transfer belt between images. This value is
added to the value of the image transfer belt bias.
002
Paper Transfer *ENG [0 to 230 / 0 / 1uA/step]
Adjusts the bias of the paper transfer roller between images.
003 Paper Transfer *ENG [0 to 2100 / 500 / 10V/step]
2316
[Power ON:Bias]
Adjusts the bias of the image transfer roller at power-on or a closed cover.
001 Image Transfer *ENG [0 to 80 / 0 / 1uA/step]
2326 [Transfer Roller CL:Bias]
001
Positive:befor and after JOB *ENG [0 to 2100 / 250 / 10V/step]
Adjusts the positive voltage of the paper transfer roller for cleaning the paper
transfer roller.
002
Negative:befor and after JOB *ENG [10 to 995 / 100 / 10%/step]
Adjusts the negative current of the paper transfer roller for cleaning the paper
transfer roller.
003
Positive:befor and
afterProcon
*ENG [0 to 2100 / 2000 / 10V/step]
Adjusts the positive current limit of the paper transfer roller for cleaning the
paper transfer roller.
004
Negative:befor and
afterProcon
*ENG [10 to 995 / 100 / 10%/step]