Ricoh D117 - Print Target Temp.

Main SP Tables-1
SM Appendix 3-7 D117/D118
Appendix:
SP Mode
Tables
016
Temp.:Upper
Delta:End:Sp.2
*ENG -
017
Temp.:Lower
Delta:Press:Sp.2
*ENG [0 to 200 / 95 / 1deg/step]
018 Rotation Time:Sp.2 *ENG [0 to 200 / 0 / 1sec/step]
019 Feed Permit Time *ENG [0 to 200 / 60 / 1sec/step]
020
Temp.:Lower
Delta:Center:Sp.3
*ENG [0 to 200 / 40 / 1deg/step]
021
Temp.:Lower
Delta:End:Sp.3
*ENG -
022
Temp.:Upper
Delta:Center:Sp.3
*ENG [0 to 200 / 15 / 1deg/step]
023
Temp.:Upper
Delta:End:Sp.3
*ENG -
024
Temp.:Lower
Delta:Press:Sp.3
*ENG [0 to 200 / 26 / 1deg/step]
025 Rotation Time:Sp.3 *ENG [0 to 200 / 0 / 1sec/step]
026 Temp.:Lower Delta:End:LT *ENG [0 to 200 / 100 / 1deg/step]
027 Temp.:Upper Delta:End:LT *ENG [0 to 200 / 100 / 1deg/step]
1105
[Print Target Temp.]
Roller Type Center and Ends: Heating roller, Pressure roller
Paper Type: Plain, Thin, Thick, OHP, Middle Thick, Special.
001 Plain1:FC:Center *ENG [100 to 180 / 155 / 1deg/step]
002 Plain1:FC:Press *ENG [0 to 200 / 150 / 1deg/step]
003 Plain1:BW:Center *ENG [100 to 180 / 145 / 1deg/step]
004 Plain1:BW:Press *ENG [0 to 200 / 150 /1deg/step]
005 Plain2:FC:Center *ENG [100 to 180 / 160 / 1deg/step]