HDD Option Type C305 (D656)
D117/D118 2-56 SM
13. Secure the HDD with the connection bracket [A] ( x 2 included in this kit).
14. Attach the controller box cover to the machine, and install the screw [B] included in this kit and
secure the HDD bracket with the controller box cover (
x 1 (included in this kit)).
15. Install all screws of the controller box cover (
x 6).
16. Reassemble the machine.
2.9.3 HDD ENCRYPTION
Do the following procedure if a customer wants to use this function.
1. Do SP5-878-2 (Option Setup - Encryption Option) and touch [EXECUTE].
2. Go out of the SP mode, turn off the operation switch, and then turn off the main power switch.
3. Turn the machine power on.
4. Push [User Tools] and select System Setting > Administrator Tools > Machine Data
Encryption Setting.
5. Press [Encrypt].
6. Select the data to be carried over to the hard disk and not to be reset. To carry all of the data
over to the hard disk, select [All data].To carry over only the machine setting data, select [File
System Data Only]. To reset all of the data, select [Format All Data].
7. Press the [Start] Key.
To Next Page
Loading...
