Ricoh D117 - Fusing Sleeve Belt Assembly

Fusing
SM 4-83 D117/D118
Replacement
and
Adjustment
4.11.9 FUSING SLEEVE BELT ASSEMBLY
1. Fusing upper cover ( p.4-77)
2. Fusing lower cover (
p.4-77)
3. Fusing entrance guide plate (
p.4-78)
4. Separation plate [A] (Springs x 2)
5. Remove the fusing lamp harness (
x 3, short plate x 1)
6. Remove the six screws on the rear frame [A].